Lower the work group to the ground. With the engine off, turn the key to the ON position and move both hydraulic control levers to…
Clean all parts in solvent and dry with compressed air. Inspect the cylinder parts for wear or damage. Replace any worn or damaged parts. Always…
Clean the outside of the cylinder before disassembly. Use the following tools to disassemble the cylinder: MEL1074 – O-ring Seal Hook MEL1075 – Adjustable Gland…
Lower the work group to the ground. With the engine off, turn the key to the ON position and move both hydraulic control levers to…
Lower the work group to the ground. With the engine off, turn the key to the ON position and move both hydraulic control levers to…
Use Bobcat hydraulic transmission fluid (P/N 6563328). If this fluid is not available, use 10W-30 or 10W-40 SAE Motor Oil (5W-30 for 0ยฐF [-18ยฐC] and…
The nut is the primary seal, the O-ring is the secondary seal and helps absorb vibration and pressure pulses at the connection [Figure SPEC- 40-9].…
The flare is the primary seal, the O-ring is the secondary seal and helps absorb vibration and pressure pulses at the connection [Figure SPEC- 40-5].…