Start the engine. Raise the lift arms and install an approved lift arm support device. (See Installing Lift Arm Support Device on Page 10-20-1.)
Stop the engine.
Raise the operator cab. (See Raising The Operator Cab on Page 10-30-1.)
Drain the hydraulic fluid reservoir [Figure 20-80-1]. (See Replacing Hydraulic Fluid on Page 10-120-3.)
Mark and disconnect the hoses (Item 1) [Figure 20-80-2] from the hydraulic fluid reservoir.
Remove the hydraulic reservoir bracket (Item 1) by removing the two mounting bolts (Item 2) [Figure 20-80-3] .
Remove the reservoir.
