The Advance Hand Control System (AHC) has a built-in diagnostic function which uses an icon on the right instrument panel to indicate the condition of…

Control Handle (Item1) [Figure 60-120-1]. Handle Control Unit (Item 2) [Figure 60-120-1]. Control Valve Actuators (Item 1) [Figure 60-120-2]. AHC/PWM Controller (Item 1) [Figure 60-120-3].…

Apply a bead of polyurethane sealer (P/N 6633583) (Item 1) [Figure 60-110-12] around the bolt holes on the blocks. Install the electric solenoid/bracket assembly (Item…

The part number listed will be needed to do the following procedure: P/N 6633583 – Polyurethane Raise the loader lift arms and install an approved…

Raise the loader operator cab. (See Raising The Operator Cab on Page 10-30-1.) NOTE: The loader control panel is removed for clarity purpose only. The…

Fasten the seat belt, disengage the parking brake pedal, press the green PRESS TO OPERATE Button and raise the Seat Bar fully. Move the steering…

The following troubleshooting chart is provided for assistance in locating and correcting BICS system problems. It is recommended that these procedures be done by authorized…

Use Sensor Testers (MEL1428) and seat bar sensor tester adapter (MEL1567) for the following procedure: Connect the seat bar sensor tester adapter MEL1567 to the…

Remove the seat bar (Item 1) [Figure 60-100-5] from the loader. (See Removal And Installation on Page 50-10-1.) Remove the mounting bolt (Item 1) from…

Use Sensor Tester (MEL1428) and seat bar sensor tester adatper (MEL1567) for the following procedure: Connect the seat bar adapter sensor leads (MEL1567) to the…