Loosen the anti-cavitation valve (Item 1) [Figure 20-41-61]. Installation: Always use new O-rings and back-up washers. Tighten to 35-40 ft.-lbs. (47-54 Nm) torque. Remove the…

Loosen the port relief valve (Item 1) [Figure 20-41-57] & [Figure 20-41-58] (Port E1 or F2). (See Port Relief Valve on Page 20-40-19.) Installation: Always…

Loosen the main relief valve (Item 1) [Figure 20-41-54]. Remove the main relief valve (Item 1) [Figure 20-41-55]. Remove the O-rings, sleeve, and glide ring…

Remove the BICS valve assembly from the control valve. (See BICSTM Valve, Removal And Installation on Page 20-41-9.) Remove the four large O-rings (Item 1)…

Remove the BICS valve assembly from the control valve. (See BICSTM Valve, Removal And Installation on Page 20-41-9.) Remove the restrictor (Item 1) [Figure 20-41-49]…

Use an Ohm meter to measure coil resistance [Figure 20-41-46]. Coil wires do not have polarity. Correct resistance for the auxiliary, lift and tilt lock…

Remove the mounting nut (Item 1) [Figure 20-41-42] from the solenoid cartridge. Installation: Tighten the mounting nut to 53 in.-lbs. (6 Nm) torque. Remove the…

Remove the lock valves (Item 1)[Figure 20-41-38], [Figure 20-41-39] & [Figure 20-41-40] from the BICS] valve. Installation: Tighten the lock valves to 25 ft.-lbs. (34…