At the top side of the control valve, remove the plug (Item 1) [Figure 20-41-46]. Installation: Always use new O-rings (Item 1) [Figure 20-41-47]. Tighten…

Remove the port relief plug (Item 1) [Figure 20-41-42] from the auxiliary circuit of the control valve. Installation: Always use new O-rings (Item 1) [Figure…

Remove the tilt port relief/anti cavitation valve (Item 1) [Figure 20-41-40] from the rod end of the tilt section. Replace the O-ring (Item 1) [Figure…

Remove the tilt port relief/anti cavitation valve (Item 1) [Figure 20-41-38] from the base end of the tilt section. Replace the O-ring (Item 1) [Figure…

Loosen the lift circuit port relief/anti cavitation valve (Item 1) [Figure 20-41-36]. Replace the O-ring (Item 1) [Figure 20-41-37] before installation. Installation: Lightly lubricate with…

At the back side of the control valve, remove the lift section anti-cavitation valve (Item 1) [Figure 20-41-33]. Always use new O-ring (Item 1) [Figure…

At the front side of the control valve locate the tilt section load check valve (Item 1) [Figure 20-41-31]. At the front side of the…

Remove the tubeline (Item 1) [Figure 20-41-27] from the control valve. Remove the fitting (Item 1) [Figure 20-41-28] from the check valve. Remove the lift…

Remove the control valve from the loader. Remove the two mount bolts (Item 1) [Figure 20-41-17] from the lift actuator. Installation: Tighten the mounting bolts…