Use the following tools to assembly the cylinder: MEL1396 – Seal Installation Tool MEL1033 – Rod Seal Installation Tool Piston Ring Compressor Spanner Wrench Wash…
Use the following tools to disassemble the cylinder: MEL1074 – O-ring Seal Hook Spanner Wrench Hold the hydraulic cylinder over a drain pan and move…
Stop the engine. Pull up on the lift arm by-pass control and move the lift pedal to release the hydraulic pressure. Disconnect the hoses (Item…
Lower the lift arms. Stop the engine. Pull up on the lift arm by-pass control. Raise the seat bar. Check only one cylinder at a…
Remove the two bolts and nuts (Item 1) and remove the bracket (Item 2) [Figure 20-100-3]. Remove the straight fitting (Item 1) and 90ยฐ fitting…
Open the rear door. Disconnect the electrical connector (Item 1) [Figure 20-100-1] from the auxiliary hydraulic interlock valve. Remove the hose (Item 1) and tubeline…
The auxiliary hydraulic interlock valve has a single solenoid stem that is normally closed. The operation of the valve is controlled by an electric solenoid.…
Stop the engine and open the rear door. Remove the bolt (Item 1) and move the air cleaner indicator (Item 2) [Figure 20-90-1] out of…