Category: BobCat 753
Raise the lift arms and install an approved lift arm support device. (See Installing Lift Arm Support Device on Page 10-20-1.) Stop the engine. Raise…
BobCat 753 – HYDRAULIC PUMP (CAST IRON) – Check The Output Of The Hydraulic Pump With Power Bob-Tach
The tools listed will be needed to do the following procedure: MEL1563 – Remote Start Tool MEL10103 – Hydraulic Tester MEL10106 – Hydraulic Test Kit…
The tools listed will be needed to do the following procedure: MEL1563 – Remote Start Tool MEL10103 – Hydraulic Tester MEL10106 – Hydraulic Test Kit…
Wash all parts in clean solvent and use air pressure to dry them. Check the body [Figure 20-60-17]. Check the gear(s) for wear [Figure 20-60-18].…
Mark the pump sections for correct assembly [Figure 20-60-9]. Remove the pump housing bolts (Item 1) [Figure 20-60-9]. Installation: Tighten bolts to 35 ft.-lbs. (47,5…
Raise the lift arms and install an approved lift arm support device. (See Installing Lift Arm Support Device on Page 10-20-1.) Stop the engine. Move…
The tools listed will be needed to do the following procedure: MEL1563 – Remote Start Tool MEL10003 – Hydraulic Tester MEL10006 – Hydraulic Test Kit…
Remove the by-pass valve (Item 1) [Figure 20-50-3] from the valve block. Inspect the by-pass valve for damage and replace if necessary. Installation: Tighten the…